Nikon Plan Apo 20x

Everything relating to microscopy hardware: Objectives, eyepieces, lamps and more.
Post Reply
Message
Author
Midnight9999
Posts: 3
Joined: Mon Dec 05, 2022 6:50 pm

Nikon Plan Apo 20x

#1 Post by Midnight9999 » Wed Jan 31, 2024 10:29 pm

Hello!
i ordered from Ebay Nikon Plan Apo 20x objective. Optics work very well, but actually i recognize that protection spring doesn`t work. Is every 20x Nikon Plan APO spring loaded? I am asking becuse i know some of them are, i know either that there are black series, newer ones no spring loaded but i didn`t hear about silver without spring.

Thanks for help
Attachments
404981421_444782597888831_8536984519921486234_n.jpg
404981421_444782597888831_8536984519921486234_n.jpg (122.82 KiB) Viewed 451 times

PeteM
Posts: 3014
Joined: Tue Dec 06, 2016 6:22 am
Location: N. California

Re: Nikon Plan Apo 20x

#2 Post by PeteM » Thu Feb 01, 2024 12:11 am

Yours should have a spring action. It can be stuck from being dropped and the shell slightly deformed, corrosion, immersion oil dried, or attempts to lube it followed by oxidized oil.

I believe there are past posts on how to unstick it. The good news, for now, is that yours appears to be stuck in the down position.

If you find that post, it will suggest various remedies such as gentle heat, safe solvents, disassembly and cleaning, use of collets to grab the end and get it moving, removing the back stop and manually moving the lens carrier back and forth, etc. Once you get it moving again, it may behave better. If not, you may want to disassemble it and carefully clean it. Ideally, you won't have to use any oil where the inner barrel slides inside the outer barrel.

Midnight9999
Posts: 3
Joined: Mon Dec 05, 2022 6:50 pm

Re: Nikon Plan Apo 20x

#3 Post by Midnight9999 » Fri Feb 02, 2024 2:43 am

Thank you a lot for help

Post Reply