Older viewing heads on newer bodies
Older viewing heads on newer bodies
Can older Olympus BH2 or CK2 viewing heads be used on newer microscope bodies like the CX series or are the viewing heads corrected for 160mm/infinity?
Re: Older viewing heads on newer bodies
You don't want to mix them up. The CH, BH, CH2, and BH2 have 160mm finite objectives and want finite heads. The CX and BX have infinite objectives and want infinite heads with the proper tube lens inside.
-
- Posts: 119
- Joined: Mon Jul 19, 2021 2:20 am
- Location: 192.0.0.1
- Contact:
Re: Older viewing heads on newer bodies
Yeah, as long as you also use finite objectives and make sure the mechanical tube length is exactly 160mm.
The real question is "why"? I have seen it being done before, but it was rather opportunistic than necessity.
The real question is "why"? I have seen it being done before, but it was rather opportunistic than necessity.
Re: Older viewing heads on newer bodies
Don’t think you can. As PeteM states, to my understanding there is a required correcting “tube lens” in the head of an Olympus infinity system, the tube lens is missing in the older heads.