Photography with the Olympus CX-41
Photography with the Olympus CX-41
I recently upgraded from an Olympus CX-31 to the CX-41 to get the trinocular head--also like the 5th objective option. What are the "parts" called that I need to do photography? I understand the U-SPT (Straight Photo tube) goes first, not sure what comes next.
-
- Posts: 117
- Joined: Mon Jul 19, 2021 2:20 am
- Location: 192.0.0.1
- Contact:
Re: Photography with the Olympus CX-41
CX41 should be uis, so you have two options for your trinocular head.
1. Direct projection
U-tv1x-2 plus u-tmad
T2 to your camera mount adaptor.
You can also use U-CMAD if your camera has a c-mount and smallish sensor.
2. Projection eyepieces
U-SPT with PE type projection eyepiece.
Options: PE2x (rare, $$$$), PE2.5x, PE3.3x, PE4x, PE5x.
On top: photomicro L (epxnesive)
Then: OM mount to your camera mount adaptor.
If you choose to remove the OM mount for an F-mount which makes adapting easier, you must flock the internals.
You can also use the relay lens type like u-tv0.63x and whatnot, but if you know those, you would not be asking. I recommend direct projection because projection eyepieces will exacerbate chromatic aberration.
1. Direct projection
U-tv1x-2 plus u-tmad
T2 to your camera mount adaptor.
You can also use U-CMAD if your camera has a c-mount and smallish sensor.
2. Projection eyepieces
U-SPT with PE type projection eyepiece.
Options: PE2x (rare, $$$$), PE2.5x, PE3.3x, PE4x, PE5x.
On top: photomicro L (epxnesive)
Then: OM mount to your camera mount adaptor.
If you choose to remove the OM mount for an F-mount which makes adapting easier, you must flock the internals.
You can also use the relay lens type like u-tv0.63x and whatnot, but if you know those, you would not be asking. I recommend direct projection because projection eyepieces will exacerbate chromatic aberration.