Page 1 of 1
Rubber tongue that came loose from adapter
Posted: Mon Sep 09, 2019 8:35 pm
by ivangallego24
Me gustaría saber cómo puedo pegar esa goma,es decir que pegamento puedo usar o si hay alguna otra forma
Re: Rubber tongue that came loose from adapter
Posted: Mon Sep 09, 2019 8:41 pm
by ivangallego24
- IMG_20190909_222734_opt.jpg (38.07 KiB) Viewed 4717 times
Re: Rubber tongue that came loose from adapter
Posted: Mon Sep 09, 2019 8:50 pm
by MichaelG.
ivangallego24 wrote: ↑Mon Sep 09, 2019 8:35 pm
Me gustaría saber cómo puedo pegar esa goma,es decir que pegamento puedo usar o si hay alguna otra forma
DeepL traslates that as:
I would like to know how I can glue that glue, i.e. what glue I can use or if there is any other way
I would suggest using a strong 'double-sided tape'
MichaelG.
Re: Rubber tongue that came loose from adapter
Posted: Mon Sep 09, 2019 9:03 pm
by Hobbyst46
Contact cement. Spread a thin layer on both surfaces and let dry for 10-15 minutes (depending on ambient temperature). Then press them together, preferrably if you can secure the bond with a vice or something similar. It should be good within a couple of hours.
Re: Rubber tongue that came loose from adapter
Posted: Mon Sep 09, 2019 9:46 pm
by ivangallego24
Loctite or superglue would be worth?
Re: Rubber tongue that came loose from adapter
Posted: Mon Sep 09, 2019 10:49 pm
by MichaelG.
Loctite is a brand name, and does not identify a specific product
https://www.loctiteproducts.com/en.html
MichaelG.
Re: Rubber tongue that came loose from adapter
Posted: Tue Sep 10, 2019 7:48 am
by Hobbyst46
ivangallego24 wrote: ↑Mon Sep 09, 2019 9:46 pm
Loctite or superglue would be worth?
Superglue (from Loctite or any other maker) is a cyanoacrylate glue. It is fast-curing and forms a strong bond, but is very stiff. For rubber surfaces, it is only a temporary solution. Contact cement is elastic, a sort of rubber itself, so it complies well with streching or distortion of the surface. My experience, anyway. And no such adhesion holds forever...
Re: Rubber tongue that came loose from adapter
Posted: Tue Sep 10, 2019 10:18 am
by 75RR
Good point on the contact glue Hobbyst46
Perhaps the OP ( ivangallego24 ) would care to review the Phone adapter.
Original Amazon reviews suggested it was better suited to a monocular, be interesting to hear how it works on a binocular head.
Re: Rubber tongue that came loose from adapter
Posted: Tue Sep 10, 2019 1:24 pm
by ivangallego24
Well in the end I used superglue brand loctite super glue cola-3 to have how much it holds, I think the superglue is extra strong