A fun one for the DIY set: pantographic micromanipulator
-
- Posts: 1547
- Joined: Tue Jan 21, 2020 1:29 am
- Location: Georgia, USA
A fun one for the DIY set: pantographic micromanipulator
So after looking at the "diatoms a different way" and the water bear hunt posts I was filled with a terrible envy and lust for those micromanipulators that could pick out specimens and arrange diatoms. Although there seem to be some workable and terrifically cheap Prior mms on the `bay even as I speak, I didn't want to have to mess with all those dials and anyway, I don't have enough space on my bench! I just made this table but then somebody decided to solve a jigsaw puzzle on it so space is again at a premium. The Singer Mk1 is intriguiging, but I think it runs between $5,000-$6,000 and I definitely don't have that kind of scratch. So here is a very simple alternative.
The best solid wood to make mechanisms with is clear beech, but I only had one tiny stick of it left, so I used the runner-up hard maple for the rest. The holes are space 2" and 6" apart (all drilled simultaneously after taping the stuff together tightly) so that the reduction is at 25%. Brass tubes, flared at the ends so they wont slip out, are used at the joints to minimize slop. There was a bit of stiction at first but oils and wax and some breaking in has left the motion quite smooth. The holes were even made with normal twist bits, no fancy forstners. The knob is a ceramic cabinet knob we had spare.
The sharp-eyed among you will have already noticed that the 5/4 hard maple slab is not the factory Bausch and Lomb stand for this stereo microscope. It was extra cheap without a base, and turns out very useful to modify here. I drilled a hole in it and, using chisels, made a rectangular recess underneath. The ball-and-socket is a bought camera mount, for which I paid an extravagant $14 or so for, almost as much as the microscope itself, but looks and operates very nicely. I attached to a hunk of 1/4" 1018 steel plate for weight and stability.
The probe is a piece of twisted sheet steel sharpened to a point and pictured here menacing a splinter of wood at 60x. At some point I want to try to make some miniature forceps and also a trigger controlled pipette. It works really very well and was easier to make than I imagined it would be. I would heartily recommend this project to anyone looking to poke some microbes on a budget. If the woodwork is for reason intimidating, professionally made pantographs can be had from art supply stores relatively inexpensively as well.
1942 Bausch and Lomb Series T Dynoptic, Custom Illumination
Re: A fun one for the DIY set: pantographic micromanipulator
Great stuff, Bram
MichaelG.
MichaelG.
Too many 'projects'
Re: A fun one for the DIY set: pantographic micromanipulator
Hi Bram,
great idea! I have never seen a pantograph based micro manipulator but the principle is quite ideal for this application. And contrary to metal dovetails, spindles and gears it is comparatively easy to build.
Bob
great idea! I have never seen a pantograph based micro manipulator but the principle is quite ideal for this application. And contrary to metal dovetails, spindles and gears it is comparatively easy to build.
Bob
Re: A fun one for the DIY set: pantographic micromanipulator
Excellent job Bram. Really nicely done.
Tom W.
Tom W.
-
- Posts: 1547
- Joined: Tue Jan 21, 2020 1:29 am
- Location: Georgia, USA
Re: A fun one for the DIY set: pantographic micromanipulator
I don't think I put it up here but I had modified this one slightly to accept some homemade forceps. This is iteration three with a simplified mechanism that holds Dumont forceps such as these an opens them with a trigger actuated cam. The design should be easy to reproduce. The cam is a sawn off end of dowel. A few bits of aluminum bar and some screws and nuts.
1942 Bausch and Lomb Series T Dynoptic, Custom Illumination
-
- Posts: 330
- Joined: Thu Oct 13, 2016 3:48 pm
- Location: Lancaster County, PA
Re: A fun one for the DIY set: pantographic micromanipulator
Hi Bram,
Nice little homemade micromanipulator! Thanks for sharing!
Kirby
Nice little homemade micromanipulator! Thanks for sharing!
Kirby
Re: A fun one for the DIY set: pantographic micromanipulator
This brings to mind the "Building Prototypes" video series by Dan Gelbart: https://www.youtube.com/user/dgelbart/videos
He talks a lot about how clever mechanism design can greatly reduce the need for precision fabrication.
He talks a lot about how clever mechanism design can greatly reduce the need for precision fabrication.
Re: A fun one for the DIY set: pantographic micromanipulator
Amazing project !
Would be nice to know working experience, of picking and moving stuff with the micromanipulator.
Would be nice to know working experience, of picking and moving stuff with the micromanipulator.
-
- Posts: 1547
- Joined: Tue Jan 21, 2020 1:29 am
- Location: Georgia, USA
Re: A fun one for the DIY set: pantographic micromanipulator
I will try to update when possible-- I only finished this one today!
1942 Bausch and Lomb Series T Dynoptic, Custom Illumination
-
- Posts: 1547
- Joined: Tue Jan 21, 2020 1:29 am
- Location: Georgia, USA
Re: A fun one for the DIY set: pantographic micromanipulator
Thanks Hans, I am looking forward to watching these.hans wrote: ↑Sun Aug 30, 2020 4:12 amThis brings to mind the "Building Prototypes" video series by Dan Gelbart: https://www.youtube.com/user/dgelbart/videos
He talks a lot about how clever mechanism design can greatly reduce the need for precision fabrication.
1942 Bausch and Lomb Series T Dynoptic, Custom Illumination
-
- Posts: 3482
- Joined: Sun Mar 22, 2020 10:06 am
- Location: Winnipeg, Manitoba, Canada
Re: A fun one for the DIY set: pantographic micromanipulator
Wow! Just wow! what a setup.
- ebenbildmicroscopy
- Posts: 130
- Joined: Sun Jul 23, 2017 8:57 pm
Re: A fun one for the DIY set: pantographic micromanipulator
THAT looks awesome... must make one. I particularly like the way that spring is built into the system!
JeffO, aka "Ortho amore"
Leitz Ortholux I
Leitz Orthoplan
Leitz Macro-Dia Device
Zeiss GFL
Zeiss Standard
Zeiss Photomicroscope III
Zeiss OPMI 6S
B&L Stereozoom and Balplan
Leitz Ortholux I
Leitz Orthoplan
Leitz Macro-Dia Device
Zeiss GFL
Zeiss Standard
Zeiss Photomicroscope III
Zeiss OPMI 6S
B&L Stereozoom and Balplan
-
- Posts: 1547
- Joined: Tue Jan 21, 2020 1:29 am
- Location: Georgia, USA
Re: A fun one for the DIY set: pantographic micromanipulator
It's pretty great one thing though is that the end of the tweezer needs to be closer to the joint than pictures to accurately reproduce the hands motion.
1942 Bausch and Lomb Series T Dynoptic, Custom Illumination
Re: A fun one for the DIY set: pantographic micromanipulator
This is pretty wild!
Re: A fun one for the DIY set: pantographic micromanipulator
I like the tweezers cam operation - very clever.
Re: A fun one for the DIY set: pantographic micromanipulator
A baby version, from the past :
https://pdfhost.io/v/J270JnPIm_LabgearHarding_2pdf.pdf
https://pdfhost.io/v/J270JnPIm_LabgearHarding_2pdf.pdf
Re: A fun one for the DIY set: pantographic micromanipulator
(No tweezers though )
-
- Posts: 1547
- Joined: Tue Jan 21, 2020 1:29 am
- Location: Georgia, USA
Re: A fun one for the DIY set: pantographic micromanipulator
This is great chas! Thanks.
1942 Bausch and Lomb Series T Dynoptic, Custom Illumination